Miller Bearing Catalog Page 11

~ PAGE 11 ~

FR-Series

This product may also be offered in
Stainless Steel
Call for availability

Bearing Number	A Dimension	B Dimension	C Dimension	D Dimension	E Dimension	Bore *	Load Rating
FR-1775-7HDS	1.775	0.453	7/32	43/64	1.880	7/16" Hex	428#
FR-1775-7H-1DS	1.775	0.593	11/32	15/16	1.880	7/16" Hex	428#
FR-1775-7HEDS	1.775	0.453	3/16	41/64	1.880	7/16" Hex	428#
FR-1775-7HFDS	1.775	0.422	19/64	23/32	1.880	7/16" Hex	428#
FR-1875-7HDS	1.875	0.453	7/32	43/64	1.980	7/16" Hex	428#
FR-1875-7H-1DS	1.875	0.593	11/32	15/16	1.980	7/16" Hex	428#
FR-1875-7HEDS	1.875	0.453	3/16	41/64	1.980	7/16" Hex	428#
FR-1875-7HFDS	1.875	0.422	19/64	23/32	1.980	7/16" Hex	428#
FR-2265-10HDS	2.265	0.718	0.468	1.187	2.435	5/8" Hex	1050#
FR-2265-11HDS	2.265	0.718	0.468	1.187	2.435	11/16" Hex	1050#
FR-2265-11HVDS	2.265	0.718	0.218	0.937	2.435	11/16" Hex	1050#

*DUE TO NORMAL WEAR; IT IS BEST TO MEASURE SHAFT SIZE WHEN DETERMINING BORE DIMENSION

A Dimension tolerance = +0.010/-0.000, B and E Dimension tolerance = +0.010/-0.010

FEATURES:

	The above bearings have 8- 17/64" Diameter balls and retainer.
	The above bearings are produced with a 16 teeth per inch knurl on the outside body of the bearing, (A Dimension), to assist in the assembly of the roll.
	S following the bearing number designates a front seal.
	DS following the part number designates a front and a back seal. The DS is standard on the FR Series.
	These bearings may be ordered with either light oil or greased packed lubricant.