Page 5                              Page 7

~ PAGE 6 ~

2511-Series

Bearing Number

A Dimension

A1 Dimension

B Dimension

C Dimension

D Dimension

E Dimension

Bore *

Load Rating

F-2511-10HSP

2.280

2.250

23/32

15/32

1-3/16

2-7/16

5/8" Hex

620#

F-2511-11HSP

2.280

2.250

23/32

15/32

1-3/16

2-7/16

11/16" Hex

620#

F-2511-11HVSP

2.280

2.250

23/32

7/32

15/16

2-7/16

11/16" Hex

620#

MF-2511-7HVSP

2.280

2.250

23/32

7/32

15/16

2-7/16

7/16" Hex

620#

MF-2511-10HSP

2.280

2.250

23/32

15/32

1-3/16

2-7/16

5/8" Hex

620#

MF-2511-11HSP

2.280

2.250

23/32

15/32

1-3/16

2-7/16

11/16" Hex

620#

MF-2511-11HSTP

2.280

2.250

23/32

15/32

1-3/16

2-7/16

11/16" Hex

620#

MF-2511-11HVSP

2.280

2.250

23/32

7/32

15/16

2-7/16

11/16" Hex

620#

MF-2511-11HVSTP

2.280

2.250

23/32

7/32

15/16

2-7/16

11/16" Hex

620#

 *DUE TO NORMAL WEAR; IT IS BEST TO MEASURE SHAFT SIZE WHEN DETERMINING BORE DIMENSION

A and A1 Dimension tolerances = +0.010/-0.000

NOTE: All 2511 bearings will have a GOLD shield (the part with Miller Bearing Company stamped on it). If your bearing does not have a GOLD shield and is dimensionally the same as a bearing above go here    Page 5

FEATURES:

bullet Above bearings have 9- 5/16" diameter balls and retainer.
 
bullet The ball retainer spaces the balls and eliminates contact friction between the balls, allowing higher operating speed, while significantly reducing the noise level of the conveyor systems.
 
bullet The patented rib feature allows this bearing to be pressed into a 2 ½" 11 gauge roll without any secondary operation.
 
bullet MF designates an all metal inner race
 
bullet F designates a plastic insert which acts to quiet the bearing, also allowing it to be re-greased.
 
bullet These bearings come supplied with a felt seal added to the front and a nylatron seal added to the back.
 
bullet These bearings may be ordered with either light oil or a greased packed lubricant.

Page 5                    Page 7

Bearing Index

Home