Page 6                              Page 8

~ PAGE 7 ~

1912-Series

Bearing Number

A Dimension

A1 Dimension

B Dimension

C Dimension

D Dimension

E Dimension

Bore *

Load Rating

F-1912-7HS

1.715

1.670

17/32

7/32

23/32

1.800

7/16" Hex

428#

F-1916-7HS

1.775

N/A

35/64

7/32

49/64

1.900

7/16" Hex

428#

MF-1912-7HS

1.715

1.670

17/32

7/32

23/32

1.800

7/16" Hex

428#

MF-1916-7HS

1.775

N/A

35/64

7/32

49/64

1.900

7/16" Hex

428#

 *DUE TO NORMAL WEAR; IT IS BEST TO MEASURE SHAFT SIZE WHEN DETERMINING BORE DIMENSION

A and A1 Dimension tolerances = +0.010/-0.000

NOTE: All 1912 series bearings will have a GOLD shield (the part with Miller Bearing Company stamped on it). If your bearing does not have a GOLD shield and is dimensionally the same as a bearing above go here    Page 4

FEATURES:

bullet Above bearings have 8-17/64" diameter balls and retainer.
bullet These bearings come supplied with a front felt seal.
bullet MF designates an all metal inner race
bullet F designates a plastic insert which acts to quiet the bearing, also allowing it to be re-greased.
bullet The patented rib feature (1912's only) allows this bearing to be pressed into the roll without any secondary operation.
bullet These bearings may be ordered with either light oil or a greased lubricant.

Page 6                    Page 8

Bearing Index

Home