Miller Bearing Catalog Page 9

~ PAGE 9 ~

FR-Series

This product may also be offered in
Stainless Steel
Call for availability

Bearing Number	A Dimension	B Dimension	C Dimension	D Dimension	E Dimension	Bore *	Load Rating
FR-1498-7HDS	1.498	0.437	5/16	3/4	1.600	7/16" Hex	302#
FR-1498-7H-1DS	1.498	0.450	17/32	63/64	1.600	7/16" Hex	302#
FR-1498-7H-2DS	1.498	0.494	9/32	25/32	1.600	7/16" Hex	302#
FR-1498-7HIDS	1.498	0.422	7/32	41/64	1.600	7/16" Hex	302#
FR-1524-7HDS	1.524	0.422	19/64	23/32	1.625	7/16" Hex	302#
FR-1524-7H-1DS	1.524	0.450	17/32	63/64	1.625	7/16" Hex	302#
FR-1524-7H-2DS	1.524	0.494	9/32	25/32	1.625	7/16" Hex	302#
FR-1524-7HIDS	1.524	0.422	7/32	41/64	1.625	7/16" Hex	302#

*DUE TO NORMAL WEAR; IT IS BEST TO MEASURE SHAFT SIZE WHEN DETERMINING BORE DIMENSION

A Dimension tolerance = +0.010/-0.000, B and E Dimension tolerance = +0.010/-0.010

FEATURES:

	The above bearings have 8- 7/32" Diameter balls and retainer.
	The above bearings are produced with a 16 teeth per inch knurl on the outside body of the bearing, (A Dimension), to assist in the assembly of the roll.
	S following the bearing number designates a front seal.
	DS following the part number designates a front and a back seal. The DS is standard on the FR Series.
	These bearings may be ordered with either light oil or greased packed lubricant.